Skip to main content
InSource Solutions

TN - 1273 InTouch as an OPC UA Server

  1. Last updated
  2. Save as PDF

Description

 

This article from InSource shows how to enable and setup InTouch as a OPA UA Server

  • Author: Lewis Talley
  • Published: 06/27/2022
  • Applies to: 2020 R2

Details

clipboard_e47abbe192eb5b17f3c27e8d1408c6a60.png

To enable OPC UA in InTouch is done from the application manager as shown below:

clipboard_ec7937e735a50a3709b8255b092f780c9.png

Next we will need to configure the OPC UA Client.  For Wonderware products, this is done via the SMC:  Note that the first image I clicked the test button on purpose with configuration mis matches to show what happens when you are unable to connect:

clipboard_efc5f2ef3500f0cce6e6aa214dd636713.png

clipboard_e39c082531a71f6805c26b307ccb3ef7f.png

 

after the configuration is saved, you should be able to access the DeviceGroup (below the OPCUA configuration) as shown and be able to add device items by browsing:

clipboard_e6c83e5444a054d41c2917932e0a116af.png

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-to
    Workflow Status
    Approved
  2. Tags
    1. Intouch
    2. opcua
    3. opcua server