Skip to main content
InSource Solutions

TN Appsvr145 IDE Open Object Error Memory on the computer is low, new editor can't be launched

insource logo large.jpg

                            Tech Note                     



This article from InSource shows how to fix a situation when opening an object in IDE. Error "Memory on the computer is low. New editor can't be launched.


  • Author: Mike Viteri
  • Published: 2/11/2015
  • Applies to: Software Name & Version


How and When to Use this Guide

When an object in the IDE will not open.


The page file size will have to be adjusted. This will change depending on how much memory you have on your system and the operating system you are using.


To determine your min and max page file size click this link


Once you have determined your sizes follow these steps:

1- Open Computer Management.

2- In the console tree, right-click Computer Management (Local), and then select Properties.

3- On the Advanced tab, under Performance, click Settings.

4- Under Virtual memory, click Change.

5- In the Drive list, click the drive that contains the paging file you want to Verify/change.

6- If necessary, under Paging file size for selected drive, click Custom size, type new paging file sizes in the Initial Size (MB) and Maximum Size (MB) boxes, and then click Set. Click OK.


Confirmation of Success

You will now be able to open objects without an error.