Skip to main content
InSource Solutions

TN IT130 How to set a Managed InTouch 2014 R2 Application to Read Only

insource logo large.jpg



This article from InSource shows how to set a Managed Intouch Application to read only in System Platform 2014R2.


  • Author: Mike Viteri
  • Published: 04/17/2015
  • Applies to: System Platform 2014R2




To set an Managed Intouch Application to read only. You will need to go into Windowmaker then Special->Configure->Remote Access. You can then choose "Read Only access"


Note: You will need a read only  runtime license to enable this feature. This feature should only be enabled if you don't want users to have write back access.


Read Access.JPG