Skip to main content
InSource Solutions

TN Hist282 How to change the Interpolation type for all Real tags in the Wonderware Historian.

  1. Last updated
  2. Save as PDF

InSource_Logo_Transparent.png

Description

 

This article from InSource walks through a process for changing the Interpolation type for all Real Tags in the Historian.

  • Author: Joseph Hefner
  • Published: 11/21/2017
  • Applies to: Historian 10 and above

Details

By default, the Wonderware Historian returns all Real values with the "Linear" Interpolation type. This tech note walks through the process for switching to stairstep.


Step 1)  Launch the System Management Console and navigate to the Configuration Editor \ System Configuration \ Parameters:

Capture1.JPG

 

Step 2) Find the parameter InterpolationTypeReal and double click on it:

 

Capture2a.JPG

Step 3)  Type in a value of 0 for Stairstep Interpolation and click "Apply" and then "OK".   If you wish to switch to linear Interpolation you would enter a value of 1 here.

Capture3.JPG

Step 4) Right click on the Configuration Editor in the tree and choose "Commit Pending Changes":

Capture4.JPG

Step 5) Click the Commit button:

Capture5.JPG