TN TM108 Ports required for ACP ThinManager
Description
This article from InSource lists the ports that are required to use ACP ThinManager, which should be open in your firewall.
- Author: Dillon Perera
- Published: 01/31/2017
- Applies to: ACP ThinManager 9.0
Details
|
Port Number |
TCP |
UDP |
Purpose |
| 67 | X | If using PXE boot, the PXE Server will use this port for IP Address Assignment. | |
| 69 | X | On ThinClient startup TFTP is used to send firmware from the ThinManager server to the thin client. | |
| 1494 | X | Used by ICA protocol in Citrix, if not using RDP. | |
| 1758 | X | Used by ThinManager if Multicast is enabled. Note: This port can be configured from within the ThinManager Server software. | |
| 2031 | X |
- Used by the ThinManager Server to send configuration to the thin client. - Used when there are multiple ThinManager Servers to maintain synchronization between them. |
|
| 3389 | X | Used by RDP protocol. | |
| 4900 | X | On ThinClient startup TFTP is used to send firmware from the ThinManager server to the thin client. | |
| 5900 | X | Used for doing Shadowing of thin clients. This port can be configured in the ThinManager Server software. | |
| ICMP | Used by WinTMC and Enforce Primary |
Information gathered from the ThinManager Knowledge Base: http://www.thinmanager.com/kb/index.php/Main_Page