TN IT172 How to change port number in Intouch Access Anywhere

Description

Changing the port number for Intouch Access Anywhere

• Author: Ernest Lee
• Published: 11/25/2015
• Applies to: Intouch 10.6 and later

Details

To change the Port on the Configuration Dialog

1. Open the configuration dialog and click the Communication tab.
2. Change the port number from 8080 (default) to 9090.
   
   Figure 1 (below) shows the change from the default port to Port 9090.

1. Figure 1: Change Port Number in Configuration Dialog
2. Click OK.
3. The InTouch Access Anywhere services will be restarted.
4. Go to the file config.js which is located under: 
   
   32-bit machine: C:\Program Files\Wonderware\InTouch Access Anywhere Server\WebServer\AccessAnywhere\
   64-bit machine: C:\Program Files (x86)\Wonderware\InTouch Access Anywhere Server\WebServer\AccessAnywhere\
5. Change the setting of the wsport item from 8080 to 9090 in the config.js file under C:\Program Files (x86)\Wonderware\InTouch Access Anywhere Server\WebServer\AccessAnywhere\ (Figure 2 below).