Skip to main content
InSource Solutions

TN ITME106 InTouch Machine Edition: Licensing a Development System

insource logo large.jpg

 

Description

How to license InTouch Machine Edition on your Development Computer

 

  • Author: Dillon Perera
  • Published: 03/30/2015
  • Applies to: InTouch Machine Edition 7.1

 

 

Details

License Models:

Demo Mode: By default InTouch Machine Edition will run in Demo Mode, allowing the user to run the development environment for a total of 40 hours.

 

Softkey License: These are used for demonstration and consignment licenses, where physical hardware was not purchased.  This will require internet access.

 

Hardkey License: These are licenses tied to a USB dongle that was received with the panel.

Licensing:
  1. Install InTouch Machine Edition.
  2. Go to Start > Programs > Wonderware > InTouch Machine Edition v7.1 > Register.
  3. Select the type of license you want to enable, either Hardkey or Softkey license.
    1. Hardkey: Ensure the USB dongle is plugged in, then press the Check button.
    2. SoftKey: 
      1. Select the Network adapter you want to associate with the license.  Choose a network card which will not be removed or disabled in the future.
      2. Copy the Hardware Identifier that is displayed.
      3. Go to the Wonderware's activation website: 
        http://wwdotprod10.wonderware.com/pr...n/default.aspx
      4. Paste the Hardware Identifier from step 3 into the website, and submit to receive your activation code.