Skip to main content
InSource Solutions

TN Citect020 How to create an Equipment Hierarchy in Citect SCADA 2016

InSource_Logo_Transparent.png

How to create an Equipment Hierarchy in Citect SCADA 2016

 

 

This Tech Note walks you through how to create an equipment hierarchy for a Mixer in Citect SCADA 2016

  • Author: Alex Davenport
  • Published: 05/30/2018
  • Applies to: Citect SCADA 2016

 

1 Click on the System Model in Citect Builder then click on the Equipment Editor.

Equipment1.PNG

 

2 When the Equipment Editor appears Right Click and select New Equipment 

Equipment2.PNG

 

3 Enter the name of your piece of equipment which in this case is a Mixer. 

Equipment3.PNG

 

4 A form will appear and enter the information as needed. Below is an example of some basic information. Please refer to the Citect Help Files if you require further assistance.

Equipment4.PNG

5 Click on File then Save.

Equipment5.PNG

6 Add further pieces of equipment to build your equipment hierarchy representing your facility

Equipment6.PNG

7 Once finished an example is shown below breaking out the Mixer and also showing a Heat Exchanger.

Equipment7.PNG

 

8 Click on File then Update Equipment.

Equipment8.PNG