Skip to main content
InSource Solutions

TN DAS157 Using SuiteLink to Communicate with OmniServer Pro

  1. Last updated
  2. Save as PDF

InSource Logo Transparent.png

Description

 

This article from InSource shows how to configure Wonderware Suitelink communication with Software Toolbox OmniServer Pro.

  • Author: Rich Brooks
  • Published: 1/11/2017
  • Applies to: Software Toolbox OmniServer Pro v3.0 and higher

Details

OmniServer Pro from Software Toolbox is a fully configurable I/O server.  It takes care of polling and parsing data from a device without the need for a custom driver.  OmniServer does support the use of Wonderware's Suitelink protocol though the use of the Factory Suite client.

Capture1.JPG

The client may configure Wonderware's Historian or InTouch Runtime to connect directly to the OSRVPOLL I/O Server.  This fully supports the use of the Suitelink protocol for communication.

Note:  It is necessary to install the Wonderware Common Components on the OmniServer workstation, if not already installed.  This may be installed from the Wonderware Device Integration DVD.  

You may see a logger message such as "connection attempt to OSRVPOLL refused, SLSSVC not running" from the Historian or InTouch Runtime machine.

Configure the server, application, and topic from the Historian and InTouch.

Server:  Node Name for the OmniServer

Application:  OSRVPOLL

Topic:  This is configurable from OmniServer.

Capture2.JPG

Fill in the name and description.  Select the protocol and device as needed in OmniServer.